Looking to hire Extruder Operators at our NEW Extrusion Center in Hiawatha, KS.

Some duties may include:

-Safely and efficiently operate the mix system, the extrusion system, the dryer, cooler, and transfer system to ensure product compliance to company and customer standards.

-Daily start up, shut down, and clean-up of the extrusion operation which includes: monitoring product, performing quality audits, polishing tanks and extruder, monitoring tank levels, servicing the mix platform, and keeping the extruder area clean and orderly.

-Complete the Facility Master Sanitation Schedules as assigned.

-Daily lifting of product and boxes ranging from 1 pound to 50 pounds from table level to floor and above head as often as once every approximately 15 minutes.

-Constant walking and standing required. Climbing up and down ladders or stairs required. Must be able to continually bend and stoop for length of shift.

-Must be able to use small hand tools if necessary to perform minor maintenance or adjustments.

-Days and nights available weekdays shift.

-Days and nights available for weekend shift.

Fairview Mills is looking to hire a full time Mill Operator in Elwood, KS for the second shift.

Some duties may include:

-Operate the computer that controls the batching scale, mixer, receiving leg and roller mill.

-Fill bins with needed product, monitor batching and mixing, weigh out hand-adds, confirm empty bins and operate the roller mill.

-Record key data for incoming ingredients and for each batch.

Kansas City Treats is looking to hire a Packaging Tech in Kansas City, KS.

Some duties may include:

-The quality of the product and packaging must be observed, and any deviation from the norm must be reported as soon as possible to the Shift Supervisor.

-The monitoring of product, labels and packaging.

-Recording and reporting of packaging output verbally and in written communication form on the documents provided.

-Must adhere to facility SOPs on documentation and follow standard training that will be issued in this area.

-Responsible for housekeeping of the working area. This includes, but not limited to sweeping the floor around the packaging machine area, removing the trash, preparing for next day’s/shift’s production, and finalizing paperwork in an accurate, clear, and concise manner.

J-Six Enterprises/Fairview Mills is looking to hire a Maintenance Technician.

Fairview Mills is looking to hire a Warehouse Operator in Fairview, KS.

Some duties may include:

-Operate a sit-down forklift in tight quarters.

-The quality of the product and packaging must be observed, and any deviation from the norm must be reported as soon as possible to the Shift Supervisor.

-Responsible for monitoring of product, labels and packaging.

-Daily lifting of product ranging from 1 pound to 75 pounds.

-Must be able to work in an environment where the indoor temperature ranges from 80 to 100 degrees F in summer and 50-65 degrees F in winter.

Fairview Mills is looking to hire a General Mill Worker in Auburn, NE.

Some duties may include:

-Responsible for performing various tasks to aid daily operations in the warehouse and mill areas.

-Would include helping load or unload ingredients, transferring ingredients to trailers, assisting in the mix room, sanitation duties, and any other duties that may be assigned.

J-Six Farms is looking to hire a General Swine Caretaker in Nemaha County, KS.

Daily Duties will include:

-Employee will be responsible for the overall well-being of  the animals (swine facility).

-This would include daily chores, animal health, maintenance and upkeep of the facilities such as cleaning, disinfecting, bio-security and safety.

Kansas City Treats is looking to hire Extruder Operators in Kansas City, KS.

Some duties may include:

-Safely and efficiently operate the mix system, the extrusion system, the dryer, cooler, and transfer system to ensure product compliance to company and customer standards.

-Daily start up, shut down, and clean-up of the extrusion operation which includes: monitoring product, performing quality audits, polishing tanks and extruder, monitoring tank levels, servicing the mix platform, and keeping the extruder area clean and orderly.

-Complete the Facility Master Sanitation Schedules as assigned.

-Daily lifting of product and boxes ranging from 1 pound to 50 pounds from table level to floor and above head as often as once every approximately 15 minutes.

-Constant walking and standing required. Climbing up and down ladders or stairs required. Must be able to continually bend and stoop for length of shift.

-Must be able to use small hand tools if necessary to perform minor maintenance or adjustments.

-2nd Shift is from 3pm-11:30pm

-3rd Shift is from 11pm-7:30am

Kansas City Treats is looking to hire a Maintenance Technician in Kansas City, KS.

Some duties may include:

-Responsible for the support of production lines, equipment, and the facility.

-Must be able to perform preventative maintenance, troubleshoot, maintain, and repair operating equipment during production and breakdowns.

-Work with others to achieve objectives of safety, productivity, quality, and more.

-Assist with root cause analysis to identify reasons for failures and breakdowns.

-Review electrical and pneumatic schematics during troubleshooting, repair, and preventative maintenance project work.

Required

-High school diploma or equivalent

-Experience in maintenance or associated work is a plus

-Practical knowledge of basic maintenance shop equipment

-Ability to bend, climb, crawl, work in confined spaces, work in hazardous condition spaces, work in extreme weather conditions, use hazardous materials, and lift up to 50 lbs. Must also be able to work with heights.

-Ability to prioritize and multi-task as you work in a fast-paced environment to keep our company operational

-Good organizational skills as you ensure that you have sufficient supplies to handle routine maintenance tasks and can quickly get other supplies as needed to reduce downtime.

THM is looking to hire a Maintenance Technician in Topeka, KS

Duties would include:

-Planting crops

-Applying nutrients

-Harvesting

-Performing land improvements.